XionLab 2 In 1 Rust Converter & Metal Primer – Pint

XIONLAB 2 In 1 Rust Converter:

  • Covers 2.5X more area. One gallon of product covers up to 1000 sq. ft. Can be applied with a brush, or spray gun.
  • Water-Based, can be applied to a damp surface, does not trap moisture, can be diluted with water. Tools clean up with water.
  • One-step rust converter and primer coating. Low VOC (less than 1% by weight). No topcoat is needed. Accepts a wide range of coatings, not just oil-based.
  • Prevents corrosion. Bonds with rust, cures hard as cement, no scraping, no sandblasting
  • Expands and contracts with metal; in lab tests, withstood 300°F (149°F) for 90 days without cracking or peeling.
  • UV and Hydrogen sulfide resistant. Contains no lead or heavy metals.
$43.98
Buy Now

Made in USA

High Quality

Terra Care Certified

Free Shipping

Description

  • THE ONLY RUST CONVERTER FOR METAL THAT CAN BE APPLIED ON DAMP SURFACES! Save precious time and effort with the XIONLAB ultimate rust reformer. Our rusty metal primer is specifically designed to stop rust by converting EVEN DAMP rusted metal surfaces to phosphate without heavy scraping or sandblasting!
  • COVER 2.5X MORE AREA & GET A BIGGER BANG FOR YOUR BUCK! Our rust neutralizer will cover up to 1000 square feet per gallon, and up to 125 sq. ft. per pint, so you can protect your metal surfaces from further corrosion. You can dilute it with 20% water and use a spray gun to apply this one-step rust treatment solution to all your rusty metallic surfaces with ZERO EFFORT!
  • CAN ACCEPT ALL TOP COATINGS – NOT JUST OIL-BASED! You can easily apply oil-based, water-based, enamels, or any other top coating you like. OR you can go ahead and save your hard-earned money and skip on the top coating since our industrial-strength rust remover and primer do not require a topcoat!
  • CLEANING YOUR TOOLS IS A BREEZE thanks to our water-based formula, your tools can be washed quickly without any soap or chemical products. Plus, our UV and Hydrogen Sulfide resistant, professional-grade corrosion converter is safer for the environment, nonflammable, contains less than 1% VOCs, NO lead, and NO oily solvents nor resins.
  • GET YOUR ANTI RUST METAL SOLUTION TODAY 100% RISK-FREE! Our mission is to offer you pro-grade solutions for your renovation or construction projects. And we know that impeccable quality is your top priority. That’s why we confidently back our rust eliminator with our EXCLUSIVE full-money back guarantee! What are you waiting for?

Specifications

Product Dimension
6.5 x 6.5 x 9.5 inches
Item Weight
10.00 pounds
Manufacturer
XIONLAB
ASIN
B07HR267GV
Part Number
XL07
Customer Reviews
Reviews
( out of 5 stars)
Best Sellers Rank
#16,054 in Automotive
Item Volume
1.00 gallons
Color
Red Oxide

No bad odour

Fresh Color

Septic Safe*

Safe on Pipes

No toxic fumes

Nonflammable

xionlab rust converter gallon

xionlab rust primer gallon

Rust Converter & Primer

Want To Save Time, Effort & Protect Your Metal Surfaces From Corrosion?

If you are looking for a rust stop paint that will prevent corrosion from destroying your metal rails, banisters or handrails without the need for an additional top coat, then you should look no further!

Introducing The Ultimate 2-In-1 Rust Converter & Primer By XIONLAB!

Now you don’t have to settle for all those low quality rust eliminators that require additional top coatings, cover a small area and take forever to remove from your tools! Our professional-grade rust neutralizer and sealer will help convert your metal surfaces into phosphate and make your renovation project easier than ever.

Cover 2.5X More Area & Get A Bigger Bang For Your Buck!

Our rust neutralizer will covers 530 - 1,000 square feet per gallon, so you can protect your metal surfaces from further corrosion. You can dilute it with 20% water and use a spray gun to apply this one-step rust treatment solution to all your rusty metallic surfaces with ZERO EFFORT! 2 container sizes available: Gallon containers covers up to 1000 sq. feet Pint container covers up to 125 sq. feet

Rust Converter

Stop Rust Faster & Easier

Stop Rust Faster & Easier THE ONLY RUST CONVERTER FOR METAL THAT CAN BE APPLIED ON DAMP SURFACES! Save precious time and effort with the XIONLAB ultimate rust reformer. Can be applied with brush, or spray gun. Our rusty metal primer is specifically designed to stop rust by converting EVEN DAMP rusted metal surfaces to phosphate. Will not trap moisture. No need for heavy scraping or sand blasting! Only one application needed. No top coat required. One step rust converter and primer. 2 products in one. Easy clean up. Clean all your tools with just water.

stop rust

CAN ACCEPT ALL TOP COATINGS – NOT JUST OIL-BASED!

You can easily apply oil based, water based, enamels or any other top coating you like. OR you can go ahead and save your hard- earned money and skip on the top coating, since our industrial-strength rust remover and primer does not require a top coat! Accepts a wide range of coatings: Urethanes Epoxies Enamels (Oil Based) Enamels (Water Based) Alkyd Bitumen Chlorinated Rubber

Use a Rust Converter
environmentally safer

Environmentally Safer Formula

Our water-based formula is a professional-grade corrosion converter that is safer for environment. Our UV and Hydrogen Sulfide resistant formula is non flammable, contains less than 1% VOCs, NO lead, NO heavy metals, and NO oily solvents nor resins.

Cleaning Your Tools Is A Breeze

Thanks to our water-based formula, your tools can be washed quickly without any soap or chemical products. SUGGESTED USES: Wrought iron fences and railings Gangplanks and scaffolding ProductionEquipment Truckbeds Docks Stair cases and catwalks Racking and shelving Storage tanks Lawn care and landscaping equipment Farm equipment Heavy machinery Steel window frames and many more...

cleaning

Get Your Anti Rust Metal Solution Today 100% Risk Free!

Our mission is to offer
you pro-grade solutions for your renovation or construction projects. And we know that impeccable quality is your top priority. That’s why we confidently back our rust eliminator with our EXCLUSIVE full-money back guarantee! What are you waiting for?

rust metal solution

Bonds With Rust...Cures Hard As Cement

Our Rust Conveter & Primer is a cementatious coating that is not based on normal resins, but which bonds like cement. Cement bonds by the crystallization of chloride and hydroxides and our product bonds by the combination of phosphates with aluminum hydroxides. The advantage of this type of bonding is twofold: 1. It gives the coating an extremely hard surface. 2. The bond can take place in the presence of water which means that our rust treatment may be used on a damp surface. Our rust converter and metal primer is a low VOC (less than 1% by weight) phosphating paint, making it the only successful paint to convert corrosion salts such as iron oxide to phosphates. These phosphates which may take the form of iron phosphate, zinc phosphate, chromium phosphate, etc. are resistant to oxidation and therefore prevent corrosion.

bonds with rust

Directions

SURFACE PREPARATION Surface must be free from oil, grease, loose or peeling paint. Loose rust should be removed by mechanical agitation. A minimum cleanliness of SSPC-SP-3 is required. Our rust converter bonds best to a rusty surface; do not brush down to bare metal. Do not apply to a surface hotter than 100°F/37°C. Mix until uniform before applying. Apply to a thickness of 0.5–1.0 mil Dry Film Thickness (0.8–1.6 mil wet film thickness). Recommended for: Iron; Steel; Stainless Steel

directions

STEPS

1. Stir thoroughly before using. 2. Wirebrush surface to remove all loose flaky rust. Do NOT brush down to bare metal: Product bonds best to a rusty surface. 3. Wipe away debris with a cloth, paintbrush or air pressure. All grease and oil must be completely removed from the surface. Rinse thoroughly. 4. Stir product thoroughly until smooth, even consistency is obtained. 5. Apply with brush or spray. (For spray application, may dilute with up to 20% water.) 0.5-1.0 mil Dry Film Thickness. 6. If a top coat is to be applied use only 1 coat of product. Apply top coat only after product has dried completely. (48 hours) 7. If not applying a top coat; 2nd coat of product must be applied before first coat has dried; within (2-4 hours) 2nd coat should be applied at 0.5 mil dry film thickness. 8. For highly acidic, corrosive or abrasive environments such as strong acid or salt brine, a top coat is recommended.

steps
,

FAQ

Can I use a garden sprayer?

You can, but it will be harder to control the spray pattern and get a completely uniform coat. It might also slow drying time and decrease coverage area due to putting on a heavier coat. Watch that the nozzle does not clog, this is a high solids product that could cause issues with smaller droplet spray patterns.

Can I spray a coat of XionLab 2 & 1 and spraying one coat of enamel?

Yes…one coat, our rust converter should be ok.

what is the recommended spray tip for an HPLV spray gun? What pressure setting is best?

Make sure that you follow the label directions and thin the product with no more than 20% water by volume and mix thoroughly. When being used in any sprayer, it is imperative that the directions for the sprayer be followed closely. Straining the final ‘thinned’ mixture as you put it into any sprayer is recommended by any spray gun manufacturer. Typical pressure used for an HVLP gun is 15-25psi, depending on the tip and how thin you reduce the product. The size of the strainer should be relative to the spray nozzle. If you have a 1.4 mil nozzle (ideal); for example, this means that any particle larger than 1.4 mil will clog the gun and adversely affect the performance. Disposable paint strainers are available almost anywhere paint is sold, this would be the preferred recommendation for any spray application. There will always be some level of precipitate that exists, so do not be alarmed if the strainer catches some unincorporated solids. Mix the 2 in 1 or shake it in a paint shaker first; then thin the fully mixed paint with up to 20% water. Mix the thinned paint and then pour it through your paint strainer, directly into the reservoir on the paint gun. This will yield the best coverage and performance.

What do I need to do to apply this product with a spray gun?

Applying the product with a spray gun is a very easy process. We recommend diluting the product 20% with water and running it through a strainer, fine enough to catch any particles that are larger than the openings in the tip. Only dilute what you are going to spray and discard any unused portion, just like any other coating. Clean the gun with simple water and a small brush. Follow the manufacture’s recommendations for disassembly and cleaning of the spray gun.

Can I use your 2-1 rust converter on my new steel parts that are not rusty as a primer?

Yes, you can use this on bare ferrous metal. Many times there is still minor oxidation that this product will attack and protect. Be sure any oils, grease, or protective coatings are stripped from the bare metal before coating.

Can I use XionLab Rust converter Primer on part vehicle parts such as rear end, crossmembers, brackets and other small parts?

Yes, our product is ideal for all mild steel, stamped plates, cast iron, brackets, and other automotive parts.

If I scrape all loose rust and then apply two coats, will it extend the life of the pan?

Our product will protect your pan from further oxidation and thus extending its useful life.

What is the minimum temperature that your rust converter can be applied?

We do not recommend using our rust converter under 50 degrees.

Will it be ok to pour concrete around the treated rebar

Concrete is no problem.

I live in an area with temperatures goes below zero. Do I need to be concerned that my converter was exposed to below freezing temperatures?

Absolutely not. Our product expands and contracts with heat and freezing temperatures. This is one of the things that make it so effective, is the ability to maintain solid adhesion despite temperature swings.

Will your product adhere to a galvanized steel roof that is rusted?

This product should not be used on soft metals, such as galvanizing. It is a low pH product that will etch into soft metals. If the galvanization is gone and it is only steel, our product will work well.

My one concern is that your product dries to a red color and I am looking for a final color of black. Is it possible to add a dye pack or pigment to your product to achieve this?

The product has not been tested with added dyes, we do not recommend this. It is preferred that you apply a topcoat in the color of your choosing.

Would the 2 in 1 rust converter be usable on a steel hull boat. Will an epoxy primer and paint adhere to the 2 in 1?

Yes, the product has been used in many maritime applications with great success. It shows great adhesion when used with an epoxy primer.

After applying the base coat of the rust converter, how long can/should I wait to topcoat?

The product should be fully cured, before applying another coat. Relative humidity, temperature, airflow, and sun exposure all affect curing; however, we recommend a baseline of 24-48 hours to cure completely.

If I choose to top coat with another product, how long can I wait before applying?

The product should be fully cured, before applying another coat. Relative humidity, temperature, airflow, and sun exposure all affect curing; however, we recommend a baseline of 24-48 hours to cure completely.

is this a moisture cured product?

No, it is not, it is a water-based product that cures through a typical evaporation process.

f this is OK to thin with water does that mean I can spray and not worry about any minor moisture in air line?

Yes, as long as there are no other contaminants such as oil or silicone. The presence of moisture in the line might affect the appearance of the final dried product as it could yield an inconsistent spray pattern.

What is life of opened & unopened can?

It is best to use it up once it has been opened, but if you cannot…you should try to use the remainder within 3 months. It is imperative that you seal the container well to avoid the product drying out. Any unopened container should be used within 12 months and protected from freezing or superheating while in storage. Once the product has been applied and cured, freezing and heating are no longer an issue. This product is >50% solids, so it will settle over time, make sure to mix or shake it thoroughly before any use.

is unused portion best poured off into full smaller containers?

No, we do not recommend transferring leftovers into a smaller container. The instructions and product information label should always be on the container the product is housed.

If brushed or rolled can it be worked or are you supposed to avoid a lot of movement once down?

It is best to put it down and leave it alone until it cures.

Would you recommend this product for these applications to prevent rusting. Would there be any reaction with the concrete or VOC’s in the home?

Yes, this product would work to protect almost any ferrous metal product.

Can I use it on a roof vent that's aluminum and on galvanized steel?

No, this product is not for use on aluminum or galvanized steel.

What kind of your product is suitable for industrial furnace applications?

This product has been successfully tested for expansion and contraction up to 300F and showed no issues with adhesion. The product might discolor at the higher range, but it did not affect the performance.

Do you have experience with your rust converter in industrial furnaces?

This product has been successfully tested for expansion and contraction up to 300F and showed no issues with adhesion. The product might discolor at the higher range, but it did not affect the performance.

How long does it take before full drying and/or coating by next application?

Typically 24-48 hours depending on relative humidity, temperature, airflow, and sun exposure.

What is the maximum permanent (operating) temperature of exposure allowed on the formed layer as a result of using your product?

Our product has been tested up to 300F.

At a constant temperature of about 212 ° F, how many years will the formed layer last?

It is impossible to assess that with limited information. There are many other factors that come into play, but our product has been tested up to 300F.

After applying the rust converter, can metal elements be welded onto the formed layer without removing the layer?

Our product is no a weld-through primer, you will need to expose the bare metal to fuse it properly.

What is the approximate quantity of rust converter needed to apply on an area of about 11,840 sq.ft, and how much will it cost?

At 1.0mil dry thickness, you can cover about 1,000 sq feet. Any channels or brakes in the metal tend to collect additional material and affect the coverage. If your surface is perfectly flat and you are using a sprayer, we would recommend approximately 12 gallons plus a 10-15% overage, to cover any product lost in transfer, drift, or pooling.

Will the XionLab Rust Converter and Primer works in salt water?

It has been used in both saltwater applications as well as brackish water and performed well.

Proudly Made In The USA by a Family Small Business

Many U.S. companies have outsourced or moved their manufacturing operations overseas. The result of this is that consumers are getting lower quality products. At Xion Lab, we believe that we have a responsibility to our consumers and retailers to not only provide high-quality products, but also continue to develop employment opportunities in the USA. We’re proud to see how the impact of that decision has allowed us to provide a better quality product, and provide jobs and opportunities for people here in the U.S. At Xion Lab, we’re proud of our humble history. Our family owned and operated small business will not focus its efforts in designing a super attractive packaging for our products. We will focus our resources in making sure our products are made with premium, quality ingredients. Our mission is to honor God with the many talents He has given us, and develop safer chemical products that work.

usa

Customer reviews

XionLab 2 In 1 Rust Converter & Metal Primer – Pint

Reviews

There are no reviews yet.

Add a review

Post Comment